Steps
1. Align the microphone modules (2) with their slots on the base panel.
2. Route the cable through the routing guides on the display-assembly base.
3. Replace the eight screws (M2X2.5) that secure the microphone module to the base panel.
4. Route the microphone cable through the routing guides on the display-assembly base and connect the microphone cable to
the system board.
Next steps
1. Install the speakers.
2. Install the
system-board
3. Install the stand.
4. Install the
bottom
cover.
5. Install the
back
cover.
6. Follow the procedure in
Fan
Removing the fan
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
38
Removing and installing components
shield.
After working inside your
Before working inside your
computer.
computer.