Dell Inspiron 24-5401 Service Manual page 65

Table 8. System setup options—Intel Software Guard Extensions menu
Intel Software Guard Extensions
Intel SGX Enable
Enclave Memory Size
Performance
Multi Core Support
Intel SpeedStep
C-States Control
Intel TurboBoost
HyperThread Control
Power Management
AC Recovery
Enable Intel Speed Shift technology
Auto On Time
Deep Sleep Control
USB Wake Support
Wake on LAN?WLAN
Block Sleep
POST Behavior
Adapter Warnings
Numlock Enable
Fn Lock Options
Fastboot
Extend BIOS POST Time
Full Screen Logo
Enable or disable Intel Software Guard Extensions.
Set the Intel Software Guard Extensions Enclave Reserve Memory Size.
Enable multiple cores.
Default: Enabled.
Enable or disable Intel Speedstep Technology.
Default: Enabled.
NOTE: If enabled, the processor clock speed and core voltage are adjusted
dynamically based on the processor load.
Enable or disable additional processor sleep states.
Default: Enabled.
Enable or disable Intel TurboBoost mode of the processor.
Default: Enabled.
Enable or disable HyperThreading in the processor.
Default: Enabled.
Sets what action the computer takes when power is restored.
Enables the system to turn on automatically, when AC is inserted.
Enable/disable Intel Speed Shift Technology support . Setting this option to
enable to allows the operating system to select the appropriate processor
performance automatically.
Default: Enabled.
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
Default: Disabled.
Enable or disable the Deep Sleep mode support. Default: Enabled
Enable the USB devices to wake the computer from Standby.
Enable or disable the computer to be powered on by special LAN signals.
Default: Disabled
Enable or disable block sleep.
Enable adapter warnings.
Default: Enabled.
Enable or disable Numlock.
Default: Enable Numlock.
Enable or disable the Fn lock mode.
Enable to set the speed of the boot process.
Default: Thorough.
Set the BIOS POST time.
Enable or disable full screen logo
System setup 65