Table of Contents
Advertisement
Steps
1. Align the screw holes on the fan with the screw holes on the display-assembly base.
2. Replace the three screws (M2x2.5) that secure the fan to the display-assembly base.
3. Route the fan cable through the routing guides on the display-assembly base.
4. Connect the fan cable to the system board.
Next steps
1. Install the
system-board
2. Install the stand.
3. Install the
bottom
cover.
4. Install the
back
cover.
5. Follow the procedure in
Antennas
Removing the antennas
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
5. Remove the
system-board
6. Remove the
wireless
card.
7. Remove the speakers.
About this task
The following image indicates the location of the antennas and provides a visual representation of the removal procedure.
40
Removing and installing components
shield.
After working inside your
Before working inside your
shield.
computer.
computer.
Advertisement
Table of Contents
