Buttons And Functions - Nobu NBKU3VI-09WFI User Manual

Wall mounted air-conditioning unit
Table of Contents

Advertisement

Buttons and Functions

Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions
ON/OFF
Turns the unit on or off.
ON/OFF
Turns the unit on or off.
TEMP
Increases temperate in
TEMP
1°C (1°F) increments.
Increases temperate in
Max. temperature is
1°C (1°F) increments.
30°C (86°F).
Max. temperature is
NOTE: Press together
30°C (86°F).
buttons at the same time
NOTE: Press together
for 3 seconds will alternate
buttons at the same time
the temperature display
for 3 seconds will alternate
between the °C & °F.
the temperature display
between the °C & °F.
SET
Scrolls through operation
SET
functions as follows:
Scrolls through operation
Fresh(
) Follow Me( )
functions as follows:
AP mode(
)
Fresh ....
Follow Me(
)
AP mode
(
)  Follow Me(
The selected symbol will
The selected symbol will
flash on the display area,
flash on the display area,
press the OK button to
press OK button to confirm.
confirm.
TEMP
TEMP
Decreases temperature
Decreases temperature
in 1 C(1 F) increments.
O
O
in 1 C(1 F) increments.
O
O
Min. temperature is
Min. temperature is
16 C(60 F).
O
O
16 C(60 F).
O
O
FAN SPEED
FAN SPEED
Selects fan speeds in the
Selects fan speeds in the
following order: AUTO -
following order:
LOW - MED - HIGH
AUTO
LOW MED
NOTE: Holding this button
down for 2 seconds will
NOTE: Holding this button
down for 2 seconds will
activate Silence feature.
activate Silence feature.
SWING
Starts and stops the horizontal
SWING
louver movement. Hold down
Starts and stops the horizontal
for 2 seconds to initiate vertical
louver movement. Hold down
louver auto swing feature.
for 2 seconds to initiate vertical
louver auto swing feature(some units).
&
&
)
HIGH
Model:
Model:
Model: RG10B1(D2S)
MODE
Scrolls through operation
modes as follows: AUTO 
SLEEP
Saves energy duting
sleeping hours
TIMER
Set timer to turn unit on or off
Used to save the current settings
or resume saved settings.
RG10B(D)
RG10B(D)
6
section of this manual.
MODE
Scrolls through operation modes
as follows: AUTO  COOL 
DRY  HEAT  FAN
 DRY  HEAT  FAN
NOTE: HEAT mode is not
supported by the cooling only
appliance.
SLEEP
OK
Saves energy during sleeping
Used to confirm the selected
hours.
functions
OK
Used to confirm the selected
functions
TIMER
SHORTCUT
Set timer to turn unit on or off
SHORTCUT
Used to save the current
settings or resume saved settings.
CLEAN
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER'S OPERATION &
LED
INSTALLATION MANUAL).
Turns indoor unit's LED display
and air conditioner buzzer on and
LED
off (model dependent), which
Turns indoor unit's LED display
create a comfortable and quiet
and air conditioner buzzer on and
environment.
off (model dependent), which
create a comfortable and quiet
Turbo
environment.
Enables unit to reach preset
TURBO
temperature in shortest
possible time
Enables unit to reach preset
temperature in shortest
possible time

Advertisement

Table of Contents
loading

Table of Contents