Functia SET
SET function
SET
• Apasati butonul SET pentru a intra in setarea functiei, apoi apasati butonul SET sau
butonul TEMP pentru a selecta functia dorita. Simbolul selectat va clipi pe zona de afisare.
Press the SET button to enter the function setting, then press SET button or TEMP
Apasati butonul OK pentru a confirma.
button to select the desired function. The selected symbol will flash on the display area, press the
• Pentru a anula functia selectata, pur si simplu efectuati aceleasi proceduri ca mai sus.
OK button to confirm.
• Apasati butonul SET pentru a derulati prin functiile de operare dupa cum urmeaza:
Sleep (
To cancel the selected function, just perform the same procedures as above.
) → Follow Me (
Press the SET button to scroll through operation functions as follows:
Active clean (
Functia Sleep (Sleep) (
Active clean function(
Functia SLEEP este utilizata pentru a
The Active Clean Technology washes away dust,
reduce consumul de energie in timp ce
mold, and grease that may cause odors when it
dormi. Aceasta functie poate fi activata
numai din telecomanda.
adheres to the heat exchanger by automatically
Pentru detalii, consultati operatiunea de
freezing and then rapidly thawing the frost.
repaus din „MANUALUL DE UTILIZARE"
When this function is turned on, the indoor unit
display window appears "CL", after 20 to 45
Nota: Functia SLEEP nu este disponibila
minutes, the unit will turn off automatically and
in modul FAN sau DRY.
cancel CLEAN function.
Sleep function(
The SLEEP function is used to decrease
energy use while you sleep (and don't need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
For the detail, see sleep operation in
"USER'S MANUAL"
Note: The SLEEP function is not available
in FAN or DRY mode.
SET
or
sau
) → AP mode (
)
Sleep(
)
Follow Me(
):
) :
) :
)
)
AP mode (
Functia FOLLOW ME (
Follow me function(
The FOLLOW ME function enables the remote
Functia FOLLOW ME permite telecomenzii sa
control to measure the temperature at its
masoare temperatura la locatia curenta si sa
current location and send this signal to the
trimita acest semnal catre
air conditioner every 3 minutes interval.
aparatul de aer conditionat la interval de 3
When using AUTO, COOL or HEAT modes,
minute. Cand utilizati modurile AUTO, COOL
sau HEAT, masurarea temperaturii ambien-
measuring ambient temperature from the
tale din telecomanda (in loc de la unitatea
remote control(instead of from the indoor
interioara insasi) va permite aparatului de
unit itself) will enable the air conditioner to
aer conditionat sa optimizeze temperatura
optimize the temperature around you and
din jurul dvs. si sa asigure un confort maxim.
ensure maximum comfort.
NOTA:
NOTE:
Tineti apasat butonul Turbo timp de sapte
Press and hold Turbo button for seven
secunde pentru a porni / opri memorarea
seconds to start/stop memory feature of
functiei Follow Me.
Follow Me function.
• Daca functia de memorie este activata, „Ac-
If the memory feature is activated,"On"
tivat" se afiseaza timp de 3 secunde pe ecran.
displays for 3 seconds on the screen.
• Daca caracteristica de memorie este oprita,
If the memory feature is stopped,"OF "
„OF" se afiseaza timp de 3 secunde pe ecran.
• In timp ce functia de memorie este activata,
displays for 3 seconds on the screen.
apasati butonul ON / OFF, schimbati modul.
While the memory feature is activated,
Intreruperea alimentarii nu va anula functia
press the ON/OFF button, shift the mode
Follow me.
or power failure will not cancel the
Follow me function.
AP function(
Choose AP mode to do wireless network
configuration. For some units, it doesn't
work by pressing the SET button. To enter
the AP mode, continuously press the LED
button seven times in 10 seconds.
12
34
or TEMP
)
Active clean....
):
):
) :
OK