Nobu NBKU3VI-09WFI User Manual page 23

Wall mounted air-conditioning unit
Table of Contents

Advertisement

Λοιπές Λειτουργίες
SET function
SET
• Πιέστε το πλήκτρο SET για να εισέλθετε στο μενού των λοιπών λειτουργιών, και
πιέστε το πλήκτρο SET ή τα πλήκτρα TEMP ή TEMP για να μετακινηθείτε ανάμεσα
Press the SET button to enter the function setting, then press SET button or TEMP
στις λειτουργίες. Το σύμβολο της επιλεγμένης λειτουργίας θα αναβοσβήνει στο
button to select the desired function. The selected symbol will flash on the display area, press the
τηλεχειριστήριο, πιέστε το πλήκτρο OK για ενεργοποίησή της.
OK button to confirm.
• Για απενεργοποίηση της επιλεγμένης λειτουργίας επαναλάβετε την διαδικασία.
To cancel the selected function, just perform the same procedures as above.
Press the SET button to scroll through operation functions as follows:
• Οι λειτουργίες μεταβάλλονται με την εξής ακολουθία:
Active clean (
Sleep (
) → Follow Me (
Λειτουργία Ύπνου (Sleep) (
Active clean function(
Η λειτουργία ύπνο χρησιμοποιείται
για να μειώσει την κατανάλωση
The Active Clean Technology washes away dust,
ενέργειας κατά την διάρκεια
mold, and grease that may cause odors when it
του ύπνου, μεταβάλλοντας την
adheres to the heat exchanger by automatically
ρυθμισμένη θερμοκρασία. Η
freezing and then rapidly thawing the frost.
λειτουργία ύπνου μπορεί να
When this function is turned on, the indoor unit
ενεργοποιηθεί μόνο από το
display window appears "CL", after 20 to 45
τηλεχειριστήριο.
minutes, the unit will turn off automatically and
cancel CLEAN function.
Για περισσότερες πληροφορίες,
ανατρέξτε στο
Sleep function(
εγχειρίδιο χρήστη.
The SLEEP function is used to decrease
Σημείωση: Η λειτουργία δεν μπορεί
energy use while you sleep (and don't need
να ενεργοποιηθεί κατά τις λειτουργίες
the same temperature settings to stay
FAN και DRY.
comfortable). This function can only be
activated via remote control.
For the detail, see sleep operation in
"USER'S MANUAL"
Note: The SLEEP function is not available
in FAN or DRY mode.
SET
or
)
Sleep(
)
Follow Me(
) → AP mode (
):
) :
) :
)
AP mode (
)
Λειτουργία FOLLOW ME (
Follow me function(
Η λειτουργία Follow me επιτρέπει στο
The FOLLOW ME function enables the remote
τηλεχειριστήριο να μετρά τη θερμοκρασία
control to measure the temperature at its
στο σημείο που βρίσκεται και να στέλνει το
σχετικό σήμα στο κλιματιστικό ανά 3 λεπτά.
current location and send this signal to the
Όταν χρησιμοποιούνται οι λειτουργίες
air conditioner every 3 minutes interval.
AUTO (Αυτόματη), COOL (Ψύξη) ή HEAT
When using AUTO, COOL or HEAT modes,
(Θέρμανση), η μέτρηση της θερμοκρασίας
measuring ambient temperature from the
περιβάλλοντος από το τηλεχειριστήριο
remote control(instead of from the indoor
(αντί από την ίδια την εσωτερική μονάδα)
unit itself) will enable the air conditioner to
επιτρέπει στο κλιματιστικό να βελτιστοποιεί
optimize the temperature around you and
τη θερμοκρασία γύρω σας και να
ensure maximum comfort.
εξασφαλίζει μέγιστη άνεση.
NOTE:
ΣΗΜΕΙΩΣΗ:
Press and hold Turbo button for seven
Κρατήστε πατημένο το πλήκτρο Turbo για
seconds to start/stop memory feature of
7 δευτερόλεπτα για την ενεργοποίηση/
Follow Me function.
απενεργοποίηση της λειτουργίας μνήμης
της λειτουργίας Follow Me.
If the memory feature is activated,"On"
• Κατά την ενεργοποίηση, η ένδειξη "ON" θα
displays for 3 seconds on the screen.
εμφανιστεί στην οθόνη του κλιματιστικού
για 3 δευτερόλεπτα.
If the memory feature is stopped,"OF "
• Κατά την απενεργοποίηση, η ένδειξη
displays for 3 seconds on the screen.
"OF" θα εμφανιστεί στην οθόνη του
While the memory feature is activated,
κλιματιστικού για 3 δευτερόλεπτα.
press the ON/OFF button, shift the mode
• Κατά την διάρκεια της λειτουργίας μνήμης
της λειτουργίας Follow Me, η λειτουργία θα
or power failure will not cancel the
παραμείνει ενεργοποιημένη σε περίπτωση
Follow me function.
αλλαγής λειτουργίας, ενεργοποίησης/
AP function(
απενεργοποίησης της μονάδας ή σε
περίπτωση διακοπής τροφοδοσίας.
Choose AP mode to do wireless network
configuration. For some units, it doesn't
work by pressing the SET button. To enter
the AP mode, continuously press the LED
button seven times in 10 seconds.
12
23
or TEMP
)
Active clean....
):
):
) :
OK

Advertisement

Table of Contents
loading

Table of Contents