Table of Contents
Advertisement
English
4.
Plug the other end of the power cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock. Not doing so
may result in fire or electric shock.
5.
Turn on the monitor's power button and then switch on the PC's
power.
The monitor's power indicator will light up (green).
If an image does not appear, refer to the "TROUBLE SHOOTING" (p.27) for
advice.
Whenever finished, turn off the PC and the monitor.
NOTE
Adjust brightness of the screen depending on the brightness of your environment.
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
6.
When using the optional calibration kit (p. 32), connect the upstream
port of the monitor to the downstream port of the USB compliant
PC with the USB cable.
For further details about the calibration, refer to user's manual in the calibration
kit.
14
2. CABLE CONNECTION
Cable Holder
Projection
Cable Entrance
Advertisement
Table of Contents
