Sending An Emergency Alarm With Emergency Call - Motorola APX 7000 User Manual

3
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
4
Press and hold the PTT button. Speak clearly into the
microphone.
5
Release the PTT button to end the transmission and wait for
a response from the dispatcher.
6
Press and hold the preprogrammed Emergency button for
about a second to exit the Emergency Call mode.
Sending an Emergency Alarm with Emergency
Call
Procedure:
1
Press the preprogrammed Emergency button.
2 The display shows EMERGNCY and the current zone or
channel. A short, medium-pitched tone sounds and the
LED momentarily blinks red.
OR
An invalid tone sounds, if the selected channel does not
support emergency.
34
English
3
The radio enters the Emergency Call state when:
You receive the dispatcher's acknowledgment. The display
shows ACK RCVD.
OR
You receive no acknowledgement. The display shows
NO ACK.
OR
You press the PTT button while in the Emergency Alarm
mode.
4
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5
Press and hold the PTT button. Speak clearly into the
microphone.
6
Release the PTT button to end the transmission and wait for
a response from the dispatcher.
7
Press and hold the preprogrammed Emergency button for
about a second to exit the Emergency Call mode.