Erasing The Selected Encryption Keys; Requesting An Over-The-Air Rekey (Astro Only) - Motorola APX 7000 User Manual

Top display
Hide thumbs Also See for APX 7000:
Table of Contents

Advertisement

Erasing the Selected Encryption Keys

This feature allows you to erase all or selected encryption keys.
Procedure:
Use the preprogrammed Top Side (Select) button and Top
(Orange) button to erase the single key in radios with the
single-key option, and to erase all keys in radios with the
multikey option.
1
Press and hold the Top Side (Select) button.
2
While holding Top Side (Select) button down, press the Top
(Orange) button.
3
The display shows PLS WAIT.
4
When all the encryption keys have been erased, the display
shows ALL ERASED.
Note:
DO NOT press the Top (Orange) button before
pressing the Top Side (Select) button, unless you are
in an emergency situation as this sends an emergency
alarm.
42
English

Requesting an Over-the-Air Rekey (ASTRO Only)

This feature, also known as OTAR, allows the dispatcher to
reprogram the encryption keys in the radio remotely. The
dispatcher performs the rekey operation upon receiving a rekey
request from the user.
Procedure:
1
Press and hold the preprogrammed Rekey Request button
to send the rekey request.
2
If the rekey operation fails, a bad-key tone sounds and the
display shows RKY FAIL.
Note:
The rekey operation failure indicates that your radio
does not contain the Unique Shadow Key (USK). This
key must be loaded into the radio with the key-variable
loader (KVL) before the rekey request can be sent.
Refer to your local key management supervisor for
more information.

Advertisement

Table of Contents
loading

Table of Contents