Advertisement

Quick Links

Hampton Bay Lifetime Motor Warranty
The retailer warrants the fan motor to be free from defects in workmanship and material
present at time of shipment from the factory for a lifetime after the date of purchase by the
original purchaser. The retailer also warrants that all other fan parts, excluding any glass or
plexiglass parts, to be free from defects in workmanship and material at the time of shipment
from the factory for a period of one year after the date of purchase by the original purchaser.
We agree to correct such defects without charge or at our option replace with a comparable or
superior model if the product is returned to the retailer. To obtain warranty service, you must
present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the
product are your responsibility. Damage to any part such as by accident or misuse or
improper installation or by affixing any accessories, is not covered by this warranty.
Because of varying climatic conditions in the United States this warranty does not cover any
changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass
finishes of this type give their longest useful life when protected from varying weather
conditions. A certain amount of wobble is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no
other express warranty.
including but not limited to. Those of merchantability and fitness for a particular
purpose to the extent permitted by law. The duration of any implied warranty which
cannot be disclaimed is limited to the time period as specified in the express warranty. Some
states do not allow limitation on how long an implied warranty lasts, so the above limitation
may not apply to you. The retailer shall not be liable for incidental, consequential, or
special damages arising out of or in connection with product use or performance except
as may otherwise be accorded by law. Some states do not allow the exclusion of incidental
or consequential damages, so the above exclusion or limitation may not apply to you. This
warranty gives specific legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties.
Hampton Bay Lifetime Motor Warranty
The retailer hereby disclaims any and all warranties,
Date Purchased
Store Purchased
Model No.
Serial No.
Vendor No.
718212343142
UPC
180-471
219054

Advertisement

Table of Contents
loading

Summary of Contents for HAMPTON BAY 180-471

  • Page 1 Hampton Bay Lifetime Motor Warranty Date Purchased The retailer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the Store Purchased original purchaser.
  • Page 2: Table Of Contents

    SAFETY RULES....................PACKAGE CONTENTS ..................INSTALLING YOUR FAN..................HANGING THE FAN..................... ELECTRICAL CONNECTIONS ................FINISHING THE INSTALLATION............... BLADE INSTALLATION ............................INSTALLING THE MOUNTING PLATE CONNECTING THE LIGHT KIT & GLASS SHADE ..........OPERATING THE TRANSMITTER..............CARE OF YOUR FAN..................TROUBLESHOOTING..................
  • Page 3: Safety Rules

    1. Before you begin installing the fan, shut power off at the 8. After you install the fan, make sure that all mounting components circuit breaker of the fuse box. are secured to prevent the fan from falling. 2. Be cautious! Read all instructions and safety information before installing your new fan.
  • Page 4: Package Contents 2

    Unpack your fan and check the contents. You should have the following items: a. Mounting hardware: Wire nuts (3) Fan blades (3) Blade holders (3) Hanger bracket Mounting plate b. Blade attachment hardware: Canopy 10. Light plate Screws (10) Canopy cover 11.
  • Page 5: Installing Your Fan

    Note: You may need a longer downrod to maintain Hanger proper blade clearance when installing on a steep, bracket sloped ceiling. Longer downrods are available from your Hampton Bay dealer. Outlet box To hang your fan where there is an existing fixture Figure 2 Figure 4 but no ceiling joist, you may need to install a hanger bar as shown in Fig.
  • Page 6: Hanging The Fan 4

    Step 6. Now lift motor assembly into REMEMBER to turn off the power. position and place hanger ball into hanger Follow the steps below to hang your fan bracket. Rotate until the check groove has properly: Hanger ball dropped into the registration slot and seats Downrod Step 1.
  • Page 7: Electrical Connections

    Connect the BLUE wire from the fan to the WARNING: To avoid possible electrical Note: The transmitter only works within 40 shock be sure electricity is turned off at the BLUE wire marked "For Light" from the feet from receiver. Receiver.
  • Page 8: Finishing The Installation 6

    Step 1. Tuck connections neatly into ceiling outlet box. Outlet box Outlet box Step 2. Slide the canopy up to ceiling and White (neutral) Black (hot) over the two crews on hanger bracket. Rotate Green or bare Hanger canopy clockwise. Next, while holding the copper (ground) bracket Black ("AC IN L")
  • Page 9: Blade Installation

    8. Installing the 7. Blade Installation Mounting Plate Step 1. Attach fan blade to the blade h o l d e r u s i n g t h e s c r e w s p r o v i d e d . Step 1.
  • Page 10: Connecting The Light Kit & Glass Shade 9

    REMEMBER: To disconnect the power. Step 4. Install 1 x 13 Watt compact The fan blades must be already attached to fluorescent bulbs (Fig. 18) (included). the fan. Step 5.Raise glass shade and frame up Your fan and light kit though pre-wired against the mounting plate and secure by have been disassembled at the factory to tightening with screws provided.
  • Page 11: Operating The Transmitter

    Restore power to ceiling fan and test for Speed settings for warm or cool weather Installing the battery: depend on factors such as the room size, proper operation. ceiling height, number of fans, etc. Install 9 volt battery (not included), to 1.
  • Page 12: Care Of Your Fan 11

    For any additional information on your Hampton Bay Ceiling Fan, please write to: 3. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is THE HAMPTON BAY FAN & LIGHTING CO.
  • Page 13: Troubleshooting

    Problem Solution Fan will not start. 1. Check circuit fuses or breakers. 2. Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off. 3. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency. Fan sounds noisy.
  • Page 14: Specifications 13

    Fan Size Watts N.W. G.W. C.F. Speed Volts Amps 0.34 1200 15.10 kgs 17.32 kgs 2.95' (33.25 lbs) (37.14 lbs) 68" Medium 0.45 3150 0.56 5300 High These are typical readings. Your actual fan may vary. They do not include Amps and Wattage used by the light kit. Distributed by Your Other Warehouse, LLC 12100 Little Cayman Dr.

This manual is also suitable for:

219054

Table of Contents