Combi Microwave Functions - ETNA CM350ZT/E02 Instructions For Use Manual

OPERATION

Combi microwave functions

1. Press the on/off key to activate the microwave function.
'01:00' is blinking in the display and the microwave icon appears in the display.
▷
Turn the function knob two positions to the right.
2.
▷ The hot air icon is blinking. Time, temperature, the microwave icon and the oven icon
are shown in the display.
3. Turn the selection knob to the right to choose a mode (see the oven functions table).
If the symbols stops blinking, the chosen mode has been activated. You can go back
▷
one step by turning the function knob one position to the left.
You can adjust the power, the time and/or the temperature in every mode.
▷
Press the power/weight key, the clock key or the temperature/automenu key.
4.
The power, time or temperature is blinking.
▷
By turning the selection knob you can set the desired power level (100, 300 or 500 W),
▷
time and/or temperature.
To confirm the setting, press the power/weight key, the clock key or the
▷
temperature/automenu key again.
The power, time and temperature that can be set depends on the mode that you have
chosen.
5. Press the start/pause key to start the cooking process.
When the cooking process is ready, you will hear 5 beeps. The fan continues to
▷
operate for some time and then stops automatically.
If you do not press the start/pause key, the combi microwave oven switches itself off
automatically after 15 minutes.
EN 21