Oven Functions - ETNA CM350ZT/E02 Instructions For Use Manual

OPERATION

Oven functions

1. Press the on/off key to activate the microwave function.
'01:00' is blinking in the display and the microwave icon appears in the display.
▷
Turn the function knob one position to the right.
2.
▷ The hot air icon is blinking. Time, temperature and the oven icon are shown
in the display.
3. Turn the selection knob to the right to choose a mode (see chapter 'Oven functions table').
If the symbols stops blinking, the chosen mode has been activated. You can go back one
step by turning the function knob one position to the left.
4. You can adjust the time and/or the temperature in every mode (grill; setting 1, 2 or 3, 3 is
the highest setting). Press the clock key or the temperature/automenu key. The time or
temperature (grill setting 1, 2 or 3) is blinking. By turning the selection knob you can set
the preferred time and/or temperature (grill setting).
5. To confirm the setting, press the clock key or the temperature/automenu key again.
The time and temperature that can be set depends on the mode that you have chosen.
6. Press the start/pause key to start the cooking process.
When the cooking process is ready, you will hear 5 beeps. The fan continues to
▷
operate for some time and then stops automatically.
If you do not press the start/pause key, the combi microwave oven switches itself off
automatically after 15 minutes.
EN 20