Microwave Functions - ETNA CM350ZT/E02 Instructions For Use Manual

OPERATION

Microwave functions

Warning! Microwave heating of liquids (such as water) can result in delayed eruptive
boiling. This means that liquid starts boiling without you seeing any movement.
Once removed from the oven, the liquid can start to boil rapidly and spatter out of the
cup with the risk of injury. The effect of eruptive boiling can be eliminated by placing a
plastic / glass spoon in the fluid before cooking it in the microwave oven.
Warning! Take care with baby food and jars:
Caution! The contents of feeding bottles and baby food jars must be stirred or shaken
▷
after heating.
Caution! Carefully check the temperature of the contents before consumption, in order
▷
to avoid burns.
Warning! Utensils can be hot after use in the microwave oven!
1. Press the on/off key to activate the microwave function.
'01:00' is blinking in the display and the microwave icon appears in the display.
▷
2. Turn the selection key to set the cooking time. The max. cooking time depends on the
power that has been set.
Press the power/weight key to adjust the microwave power.
3.
'900' is blinking in the display.
▷
4. Turn the selection key to set the microwave power (between
100 W and 900 W). Press the power/weight key again to confirm the setting or wait for
the power to stop blinking in the display.
▷ You will hear a beep.
Press the start/pause key to start the cooking process.
5.
When the cooking process is ready, you will hear 5 beeps. The fan continues to
▷
operate for some time and then stops automatically.
If you do not press the start/pause key, the combi microwave oven switches itself off
automatically after 15 minutes.
EN 19