Installation Of The Hooks; Installation Of The Racks - ETNA CM350ZT/E02 Instructions For Use Manual

BEFORE USE

Installation of the hooks

1
a
2
b
3

Installation of the racks

Install the hooks with 'R' at the rear holes of the cavity.
Install the hook with 'F' at the front holes of the cavity.
Please remove the tape on the side of the cavity before the
installation of the hooks.
1. First, install the hook into hole 'a'.
2. Then, push the hook into hole 'b'.
3. Finally, push the hook down into the right place.
Note the difference between the left and right rack.
The left rack.
The right rack.
EN 11