Before Use; Before You Begin; Setting The Clock - ETNA CM350ZT/E02 Instructions For Use Manual

BEFORE USE

Before you begin

• Open the door and remove the packaging material.
• Do not use the microwave oven when it is damaged, but contact the manufacturer.
• Remove the protection foil from the outside of the microwave oven.
• Clean the inside of the oven and the accessories with a damp cloth. Do not use abrasive
cleaners or any strongly smelling detergents.

Setting the clock

When the power is first supplied to the microwave oven, you must set the clock. In the display
'00:00' will blink. The clock will work as long as the microwave oven is connected to the mains.
1. Turn the selection knob to set the right time (between 00:00 and 23:59).
2. Press the clock key.
The clock has been set.
▷
Notes
• If you want to change the time later on, you have to press and hold the clock key.
The actual time will blink in the display.
▷
• Turn the selection key to set the new time and press the clock key again to confirm the
setting.
EN 8