2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Assembly of the Front Base Frame and Front Stabilizer Frame
1.
Mount the front base frame (8) to the front stabilizer frame (5) using two carriage bolts (27), two
arc washers (39), two spring washers (38) and two nuts (40).
2.
Tighten the nuts.
13