Advertisement
Purpose of this manual
The purpose of this manual is to provide necessary information for product installation,
operation and maintenance.
CAUTION: Read this manual carefully before installing, using or servicing this product.
Failure to follow the instructions within this manual could result in explosion, property
damage, severe personal injury and/or death.
User safety
General safety rules. These are safety that apply:
• Always keep work area clean
• Pay attention to the risks presented by gas and vapors in the work area.
• Avoid all electrical dangers. Pay attention to the risks of electric shock or arc ash
hazards
• Always bear in mind the risk of drowning, electrical accidents and burn injuries
DANGER: This product is not intended for damage control or to deal with ooding
resulting from hull damage. This product is intended to be used in Bilge Pumping
Systems for small craft with a hull length up to 24 meters, as described within the intro-
duction and scope of S
are limited to normal amounts of water in an intact boat due to spray, rain, seepage,
spillage, and occasional small amounts of water shipped from boat movements in
heavy weather. se of product in any other way could result in ooding, catastrophic
damage to craft, serious personal injury, or death.
WARNING: This pump is designed for use with fresh water and salt water ONLY. Use
with any other hazardous, caustic, or corrosive material could result in damage to the
pump and the surrounding environment, possible exposure to hazardous substances
and injury.
2
. Bilge Pumping Systems, as speci ed in S
,
Advertisement
