Pnp/Pci Configurations - MSI K8MM2 Manual

M S-7181 M icro-ATX M ainboard
This section describes configuring the PCI bus system and PnP (Plug & Play) feature.
PCI, or Peripheral Component Interconnect, is a system which allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when communicating with
its special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to the
default settings.
Primary Graphics Adapter
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
[AGP] The system initializes the installed AGP card first. If an AGP card is
not available, it will initialize the PCI VGA card.
[PCI Slot] The system initializes the installed PCI VGA card first. If a PCI VGA
card is not available, it will initialize the AGP card.
Wakeup Event Setup
Press <Enter> and the following sub-menu appears.
3-20

PNP/PCI Configurations