Table of Contents
Advertisement
BIOS Setup
BIOS Setting Password
W hen you select this function, a message as below will appear on the screen:
Type the password, up to eight characters in length, and press <Enter>. The pass-
word typed now will replace any previously set password from CMOS memory. You
will be prompted to confirm the password. Retype the password and press <Enter>.
You may also press <Esc> to abort the selection and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the
password. A message will show up confirming the password will be disabled. Once
the password is disabled, the system will boot and you can enter Setup without
entering any password.
W hen a password has been set, you will be prompted to enter it every time you try to
enter Setup. This prevents an unauthorized person from changing any part of your
system configuration.
3-25
Advertisement
Table of Contents
