MS-6585 ATX Mainboard
PNP/PCI Configurations
This section describes configuring the PCI bus system and PnP (Plug &
Play) feature. PCI, or Peripheral Component Interconnect, is a system which
allows I/O devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its special components. This section covers some
very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
PCI VGA Palette Snoop
PCI VGA palette is the set of colors currently used by the video device. Some
special VGA cards may not show colors correctly and need to look into the
video device's VGA palette to determine what colors are in use. Then you
have to turn on the palette "snoop", permitting the palette registers of both
VGA devices to be identical. The setting must be set to Enabled if any non-
standard VGA adapter card, such as MPEG card, installed in the system requires
VGA palette snooping.
3-18