BRITAX RÖMER MAX-SAFE PRO User Manual page 8

3.4.2 Reduce distance
1
2
1 SICT element
1. Slide the SICT element 1 from the SICT fastening
point.
You need a relatively large amount of force to re-
move the SICT element from the child seat. Place
the SICT element close to the child seat.
2. Place the SICT element 1 to the side of the child seat.
The sign symbol with number 2 on the SICT ele-
ment faces the sign symbol of the SICT fastening
point on the child seat.
3. Slide the SICT element 1 onto the SICT fastening point.
4. Check the distance between the SICT element 1 and
the car door 2.
Material damage as a result of SICT element
In rare cases, the space between the car seat and
the car door is so small that the SICT element touch-
es the car door. The car door may be scratched
when it is closed.
– Carefully close the car door.
– Make sure that the SICT element does not touch
the car door.
– Do not close the car door fully if the SICT ele-
ment is touching the car door.
IP10204 | 1.2 | 2000038517
1
2 Car door
ADVICE
MAX-SAFE PRO | BRITAX RÖMER
5. If the SICT element 1 is still touching the car door 2, re-
move the SICT element (See "Remove SICT element",
Page 8).
If the SICT element is not touching the car door,
no further steps are necessary.
3.4.3 Remove SICT element
1
SICT element
1. Do not use the SICT element 1 on the selected car
seat.
2. Slide the SICT element 1 from the SICT fastening
point.
You need a relatively large amount of force to re-
move the SICT element from the child seat. Place
the SICT element close to the child seat.
3. Stow the SICT element 1.
4. Note the storage instructions (See "Storage",
Page 22).
8