Specific actions Action 1. Demands action from you. 2. Defined sequence of actions. 3..Result of action P There is where you will find the result of a sequence of actions. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Ensure that the product is not trapped between hard objects (car door, seat rails, etc.). Keep product away from moisture, wet conditions, liq- uids, dust and salt spray. Do not lean heavy objects on the product. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
3. Keep the release button 6 pressed and slide the headrest 1 to the correct shoulder height. 4. Check that the headrest 1 is locked correctly in place by pushing the headrest 1 down. P Headrest 1 is adjusted correctly. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Make sure that the angle mechanism is engaged. Make sure that the rotation mechanism is engaged. You can use the seat at different angles of inclination. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Page 7
P The angle mechanism engages with a “Click” sound. 3. Release the adjustment handle 1. 4. To check the mechanism is engaged, turn the seat 2. P The rotation mechanism engages with a ‘click’ sound. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Page 8
5. To check that the angle mechanism has engaged, pull on the seat 2. P The angle mechanism engages with a “Click” sound. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
With fastening type B, the child seat is secured to the car seat with ISOFIX 2. The child is secured in the child seat with the 3-point seat belt 1 of the car seat. Use of the sup- IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Page 10
ISOFIX installation bracket 1 of the car seat. For car seats with foldable backrests, the insertion aids 2 must be removed before folding the backrest. 4.2.3 Position child seat IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Page 11
Make sure that both ISOFIX locking arms are fully P The protection indicator 3 is green. locked in place. Both ISOFIX indicators must be green. P The bottom of the base is on the seat of the car seat. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
6. Remove the child seat from the vehicle. 7. Fold up the support leg 2. 8. Slide the head 1 of the support leg into the base. 9. Stow support leg 2 in the base. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
B (see "Changing to fastening type B (100 – 125 cm)", page 19). 2. Make sure that the support leg 1 is folded in. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Page 14
3. Connect the ISOFIX locking arms 1 to the ISOFIX in- stallation bracket on the car seat. P Both ISOFIX locking arms 1 audibly lock in place. P Both ISOFIX indicators 3 are green. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Check the position of the seat belt lock. Do not use the child seat on the car seat if the seat belt lock is in the area of the dark green belt guide. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
2. Both ISOFIX locking arms are locked into the ISOFIX installation brackets. 3. Both ISOFIX locking arms are extended the same dis- tance. 4. Both ISOFIX indicators are green. Shoulder straps Adjustment button Harness buckle Adjustment belt IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
WARNING Make sure that the lap belt is not twist- 5. Place the diagonal belt 3 on the side of the seat belt lock 2 into the dark green belt guide 5. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
11. The 3-point seat belt is not twisted. 12. The child seat is used as intended in respect of the age and size of the child (see "Intended use", page 4). IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
2. Fold the padded tongue 3 up out of the way. 3. Pull the padded crotch 2 away from the harness buckle 1. 4. Pull the harness buckle 1 through the slot 4. 5. Fold the cover 5 forwards. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Page 20
5. Tighten the harness by pulling on the adjustment belt 4. 6. Fold back the cover 5. 7. Fold down the cover 6 of the headrest. P The child seat is fitted with fastening type B. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
5. Pull the harness buckle 2 through the padded crotch 3. 4. Attach the shoulder pads 1 (see "Shoulder pads", 6. Slide the padded tongue 4 through the slot 5. page 23). IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Page 22
1. Fold down the cover of the headrest 1. 2. Place the shoulder straps 2 into the slots of the head- rest. P The child seat is fitted with fastening type A. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Twisted straps have a negative impact on the protective function. Ensure that the straps are tight and not twisted. Ensure that the straps are fitted correctly in the belt slots of the cover. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
– The buckle tongues lock in place but not audibly. – The buckle tongues can only be pushed into the har- ness buckle with difficulty. – It takes a lot of force to open the harness buckle. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Do not dismantle the product. Prevent third parties from using the defective product. Cut through the shoulder straps. Remove the approved label. Please follow the disposal regulations applying in your country. IP10231 | 1.3 | 2000039206 SWIVEL | BRITAX RÖMER...
Need help?
Do you have a question about the SWIVEL and is the answer not in the manual?
Questions and answers