BRITAX RÖMER MAX-SAFE PRO User Manual page 11

1. Check which fastening variant the car seat allows.
2. Pass the strap 1 around the rail 2.
3. Pass the metal ring 3 through one of the loops 4.
TIP The narrower the strap around the strap, the better.
4. Pull the loop tight
P Both straps are ready.
4.2.3 Fasten strap to the seat fold
Material damage as a result of strap
If the strap is passed over plastic parts or electrical
components of the vehicle, these may be damaged.
Make sure that the strap is not passed over plastic
u
parts or electrical components of the vehicle.
The fastening of the straps depends on the selected
car seat place. We distinguish between the following
car seat places.
– Single seat
– Middle seat of a bench seat
– Outer seat of a bench seat
IP10204 | 1.2 | 2000038517
ADVICE
MAX-SAFE PRO | BRITAX RÖMER
1
1
Seat fold
2
Strap
1. Check which fastening variant the car seat allows.
2. Pass the strap 2 through the seat fold 1.
3. Pass the strap 2 around the seat fold.
4. Pass the metal ring 3 through one of the loops.
TIP The narrower the strap around the seat joint, the
better.
5. Pull the loop tight
P Both straps are ready.
2
2
3
3
Metal ring
11