Settings; Adjust Headrest; Fasten Spacer; Use The Seat Insert - BRITAX RÖMER MAX-SAFE PRO User Manual

3

Settings

3.1

Adjust headrest

1
1
Headrest
1. Check that the headrest 1 is adjusted correctly.
If the shoulder straps are at or slightly below the
shoulder height of the child, the headrest is posi-
tioned correctly.
If the headrest is not positioned correctly, per-
u
form the following steps.
1
2
2
5
1 Headrest
2
Harness buckle
3
Adjustment button
2. Open the harness buckle 2 by pressing the red button.
3. To loosen the belt, press the adjustment button 3 and
pull both shoulder straps 4 forwards at the same time.
The shoulder pads are not connected to the shoul-
der straps. If you pull on the shoulder pads, the
belt is not loosened. Only pull on the shoulder
straps.
IP10204 | 1.2 | 2000038517
4
3
1
4 Shoulder straps
5
Release lever
MAX-SAFE PRO | BRITAX RÖMER
4. Open the release lever 5.
P The headrest is unlocked.
5. Slide the headrest 1 to the correct shoulder height.
6. Let go of the release lever 5.
7. Check that the headrest 1 is locked correctly in place
by pushing the headrest 1 down.
P Headrest 1 is adjusted correctly.
P Headrest 1 is locked in place.
3.2

Fasten spacer

The spacer is included in the extent of delivery.
The spacer provides additional space legroom for
your child. Use of the space depends on the space
available in the vehicle.
1
1
Spacer
1. Clamp the spacer 1 to the child seat.
2. Continue with the chapter "Positioning the child seat".
3.3

Use the seat insert

Use the seat insert if the child is between 61 and
87 cm.
1
6