Risk of injury due to twisted straps.
Twisted straps have a negative impact on the protective
function.
Ensure that the straps are tight and not twisted.
u
Ensure that the straps are fitted correctly in the belt
u
slots of the cover.
6.3
Shoulder pads
6.3.1
Remove shoulder pads
2
1
4
1
Adjustment button
2
Shoulder straps
3
Push-buttons
1. To loosen the belt, press the adjustment button 1 and
pull both shoulder straps 2 forwards at the same time.
The shoulder pads are not connected to the shoul-
der straps. If you pull on the shoulder pads, the
belt is not loosened. Only pull on the shoulder
straps.
2. Open the shoulder pads 2 using the push-buttons on
the side.
3. Unhook the revealed belt loops of the shoulder pads
from the plastic webs 4.
IP10204 | 1.2 | 2000038517
WARNING
4
3
4
5
4
Plastic web
5
Shoulder pads
MAX-SAFE PRO | BRITAX RÖMER
The belt loops on the shoulder pads can be
hooked more easily to the plastic webs if you pull
out the ends of the shoulder straps slightly.
4. Pull the shoulder pads 1 forwards out of the belt slots.
6.3.2
Attach shoulder pads
Risk of injury due to missing shoulder pads.
The shoulder pads are an integral safety component of
the child seat. If the shoulder pads are not used, this
may lead to serious or even fatal injuries.
Never use the child seat without the correct shoulder
u
pads.
Only use the original Britax Römer shoulder pads.
u
To fit the shoulder pads again, follow the steps in the
u
reverse order.
Risk of injury due to twisted shoulder pads
Twisted straps have a negative impact on the protective
function.
Make sure that the shoulder pads and straps are not
u
twisted or reversed.
Ensure that the shoulder straps in the shoulder pads
u
are positioned beneath the edge of the cover.
6.4
Change battery
Risk of irritation and swallowing
If the battery is swallowed, this can lead to fatal injuries.
Store the batteries out of the reach of children.
u
1
1
Cover
2
Used battery
WARNING
WARNING
WARNING
2
3
New battery
3
20
Need help?
Do you have a question about the MAX-SAFE PRO and is the answer not in the manual?
Questions and answers