Appendix Ainstallation Instructions For Insulating Materials - Lapierre VISION User Manual

APPENDIX A
The following are instructions for installing insulation and masonry.
You will also find the installation diagrams for the insulation panels, high-temperature bricks and insulating mat
according to your VISION evaporator model in appendices B to I.
WEAR A DUST MASK
It is strongly recommended that you wear a dust mask when preparing and installing materials
for the insulation of your evaporator.
What's included with your ready-to-install insulation:
• insulation panels,
• insulating panel and lugs for the top of the door opening,
• high-temperature bricks,
• high-temperature mortar,
• insulating mat.
What is not included and what you will need:
• a dust mask,
• a square or a level,
• a measuring tape,
• an industrial knife or a small hand saw.
1. INSULATION PANELS
• Install the insulation panels on the inside of the evaporator (A).
• Cut the insulation panels with an industrial knife or small hand saw.
• Follow the instructions in the installation diagrams for the insulation materials of your VISION evaporator. For
these instructions, refer to Appendices B to I.
Lapierre Equipment |
INSTALLATION INSTRUCTIONS FOR INSULATING MATERIALS
A
VISION EVAPORATOR
| USER MANUAL | Version 03 - March 2023
25