HP 5340A Operating And Service Manual page 169

In Table 6-1, change parts lists for A10 as follows:
b.
Change series 1252A to 1220A.
Change A10C4 to "0180-0291 C:FXD ELECT 1.0 UF 10% 35VDCW, Mfr Code 56289,
Mfr part number 150D105X9035A2-DYS."
Add "AlOCR3 1901-0040 DI0DE:SILICON 50MA 30WV, Mfr code 07263, Mfr part
number FDG1088."
Change AlOCR4 and AlOCR5 to "0122-0057 C:VAR 20PF/.4V, Mfr code 28480, Mfr
part number 0122-0057." Add "Note: A1OCR4, AlOCR5, A12CR4, and A12CR5 are
a matched set. If a n y one diode is replaced all four diodes must be replaced."
Change A10L4 to "9100-2266 COIL/INDUCTOR FXD 8.2UF lo%, Mfr code 82142,
Mfr part number 09-1316-2K."
Change A10R2 to "0698-3443 RFXD MET FLM 287 OHM 1% 1/8W, Mfr code 28480,
Mfr part number 0698-3443."
Change A10R5 to "0698-3158 RFXD MET FLM 23.7K OHM 1% 1/8W, Mfr code 28480,
Mfr number 0698-3158."
part
Change A10R7 to "0698-3151 R.FXD MET FLM 2.87K OHM 1% 1/8W, Mfr code
28480, Mfr
part
Change A10RE to "0698-0084 R.FXD MET FLM 2.15K OHM 1% 1/8W, Mfr code
28480, Mfr part number 0698-0084."
Change A10R9 to "0698-3157 RFXD MET FLM 19.6K OHM 1% 1/8W, Mfr code
28480, Mfr part number 0698-3157."
Add "AlOR10 0757-0443 RFXD MET FLM ll.OK OHM 1% 1/8W, Mfr code 28480,
Mfr part number 0757-0443."
Add "AlOR11 0757-0439 R:FXD MET FLM 6.81K OHM 1% 1/8W, Mfr code 28480,
Mfr part number 0757-0439."
Change A10R24 to "0757-0283 R:FXD MET FLM 2.00K OHM 1% 1/8W, Mfr code
28480, Mfr part number 0757-0283."
CHANGE 12
On Figure 8-34 and 8-35, change F1 to "2.5 amp slow-blow 115V operation." For instru-
a.
ments with serial prefix 1244A, 2.5 amp fuses were installed, for replacement see Table 6-1.
In Table 6-1, change F1 to "2110-0015 FUSE:CARTRIDGE 2.5 AMP 125 V MAX SLOW-
b.
BLOW ."
Change part number of MP6 to "05340-00002."
Change part number of MP7 to "05340-20028."
On Figure 8-22, delete pin W and connecting wire to XA19B. This wire was added to
c.
accommodate future changes.
d. On Figure 2-2 and Figure 3-4, change item 1 (10 MHz OUTPUT) to "TIME BASE OUT-
PUT." Change item 3 (10 MHz INPUT) to "OSC" only.
CHANGE 13
This instrument configurations for series 1244A and series 1236A are identical.
number 0698-3151."
Model 5340A
Manual Changes and Options
7-5