Advertisement
Connecting broadband | Single Socket
Connect the microfilter into the master telephone socket (this should say Openreach on it) unless built in (Diagram
1
G on page 4 and 4)
Connect one end of the grey DSL cable into the microfilter. Connect the other end of the cable into the grey port (DSL) on
2
the back of your router.
3
If you are using a house phone, connect this into the phone socket on the microfilter.
Next, plug the power cable into your electricity supply, connect the other end into the round power socket on
4
the back of your router.
Switch on your router by pressing the black on/off button located on the back of the router. The power light will
5
turn orange, after a few minutes this will turn solid green. Please allow 10 minutes for the router to fully power up,
and all lights turn solid green or flashing green.
7
Advertisement
