Advertisement
Connecting broadband | Dual Socket
Connect one end of the grey DSL cable into the internet port of the Master Socket (please note that this must NOT be an
1
extension socket) Connect the other end of the cable into the grey port (DSL) on the back of your router.
If you are using a house phone, connect this into the microfilter (or into the bottom part of the socket if you have
2
a built-in microfilter).
Next, plug the power cable into your electricity supply, switch on then connect the other end into the round
3
power socket on the back of your router
Switch on your router by pressing the black on/off button located on the back of the router. The power light will
4
turn orange, after a few minutes this will turn solid green. Please allow 10 minutes for the router to fully power up,
and all lights turn solid green or flashing green.
5
Advertisement
