Table of Contents
Advertisement
4 Interfaces
Page 9 / 31
4.1.1 Digital I/Os
The following illustration shows the electrical equivalent circuit for the digital input and output signals:
Figure 1: Simplified digital I/O circuit
The input signals use a Schmitt trigger circuit with the power supply GND as voltage reference.
The digital output circuit uses open-emitter configuration. All outputs are internally supplied by the 24V
power input.
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
info@imago-technologies.com;
www.imago-technologies.com
Advertisement
Table of Contents
