Table of Contents
Advertisement
6 Web Based Graphical User Interface (WebGUI)
6 Web Based Graphical User Interface (WebGUI)
Overview
In this chapter the operation of the Industrial DashCam 1 000 by means of the WebGUI are described. The
GUI is a Web-based GUI, namely, it runs in an Internet-browser, for instance, Firefox, Microsoft Edge and so
on. Thus, it is platform and operation system independent. WebGUI is operational as long as modern
browser is supported.
The WebGUI has been designed with the universality as the basis idea combined with the minimalism con-
cepts. Under "universality" the authors mean the possibility to use the interface in a laboratory where low
level features and settings must be available and in a production line, where the functionality must be re-
duced to bare minimum. In addition to that, the "universality" refers to the possibility of using the interface
on devices, which do and do not support touch input.
The Industrial DashCam operation is independent from the WebGUI, namely the VD-IDC keeps operating
even if the WebGUI is closed.
Accessing the GUI
The GUI is accessible from a browser running on a PC or a laptop. The PC or laptop must be connected to
the same network (also logical, not only physical) as the Industrial DashCam. IP-address or the serial number
of the Industrial DashCam is used for accessing the WebGUI. IP-address is entered into the address-line of
the browser. Alternatively, the serial number can be used. The user should enter the serial number in the
address line of the browser omitting the dashes and append ".local" to it. For example, assuming the
serial number on the device is "VSPV-3003-100001", the following should be entered into the browsers ad-
dress line "VSPV3003100001.local".
Welcome Page
Welcome page is the first page shown to the user on the startup of the Industrial DashCam's WebGUI. Wel-
come page contains the Indicator bar and the Navigation panel (Menu). The latter can be placed on the left,
as presented on Figure 2, or on the right side. Indicator bar is always located on the bottom of the page and
contains most used information about Industrial DashCam.
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
IMAGO Technologies GmbH
info@imago-technologies.com;
www.imago-technologies.com
Page 12 / 31
Advertisement
Table of Contents
