Table of Contents
Advertisement
6 Web Based Graphical User Interface (WebGUI)
Page 20 / 31
6.6.4 Camera Settings
Most settings like exposure time, gain, gain per channel and others can be set via the Camera Parameter
dialog, see Figure 10 and refer to the View Live Page section for more details on this dialog. The check box
"De-Bayer" is now reserved for the Industrial DashCam with Bayer filters.
Figure 10: Configuration page and three tabs, the "Camera" is selected
The button "Sensor" opens a dialog where the user can select between acquiring images from the sensor
or taking previously saved image sequences from the file system.
"Illumination Module" configures parameters of an optionally installed Universal Illumination Module,
which allows different light configurations for consecutive steps.
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
info@imago-technologies.com;
www.imago-technologies.com
Advertisement
Table of Contents
