Configuration Page - IMAGO VisionDevice Manual

Industrial dashcam 1 000
Table of Contents

Advertisement

6 Web Based Graphical User Interface (WebGUI)

Configuration Page

The Configuration page is a service page containing the hardware related settings, which consists of four
tabs: "General", "Camera", "Dashcam" and "Triggering", see Figure 9. The Configuration page is blocking,
thus clicking outside the page will close it, as well as pressing "X" or "Cancel" button. All the settings can
be saved or loaded by pressing
The settings are applied only after pressing the "Use" button, some settings might require restart of the
application or even reboot of the whole system.
Figure 9: Configuration page and three tabs, the "General" is selected
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
button and choosing "Save" or "Load" from the drop-down menu.
IMAGO Technologies GmbH
info@imago-technologies.com;
www.imago-technologies.com
Page 18 / 31

Advertisement

Table of Contents
loading

Table of Contents