Table of Contents
Advertisement
2. TUNER SECTION
1. TUNING FREQUENCY DISPL Y
You can confirm the frequency of tuner through this display.
2. B ND SELECT BUTTON
These switch is for selecting M or FM, when using the tuner.
3.
DDRESS SELECT BUTTON
These switches select six memory address banks for the storage of broadcasting frequencies. Each of these
banks can be hold five broadcasting frequencies at designated memory address areas, i.e., F1, F2, F3,
and 2. Therefore a total of thirty broadcasting frequencies can be stored.
4. UP/DOWN BUTTON
When the switch is momentarily pressed once, the M/FM frequency will adjust with a single UP/DOWN count.
When the switch is pressed continuously, the frequency is continuously fast UP/DOWN counted.
5. MEMORY BUTTON
This is for memorizing the broadcasting frequency.
1. Select the memory area M or FM with the B ND switch (2).
2. Select the frequency that you want to memorize with the UP/DOWN switch (4).
3. Press the MEMORY switch (5), then select the desired address with DDRESS switch (3).
4. The present status of the tuner will be memorized in the selected address.
6. POWER SWITCH
Pressing this switch to ON, will light and supply the power to this unit.
F1
MULTI P. COMBIN TION
7
SYSTEM-2240G
1
Advertisement
Table of Contents
