How To Use Cd / Mp3 Player - Inter-m SYSTEM-2240G Operation Manual

MULTI P. COMBIN TION

How to Use CD / MP3 Player

How to Use CD / MP3 Player
Power ON/OFF
- When there does not exist a disc upon power-on:
1. If power is applied to CDP,
2. Push the CD softly until the tray pulls on the CD.
3. While the unit reads CD,
4. For MP3 CD,
5. fter the unit searches the music information on a CD (for about 10 seconds),
displayed, keeping a standby status.
6. Press the switch to start operation. Then playback is started from the first song on a CD.
- When there exists a disc upon power-on:
1. While the unit reads CD,
2. For MP3 CD,
3. fter the unit searches the music information on a CD,
status.
4. Press the switch to start operation. Then playback is started from the first song on a CD.
- LCD DISPL Y OFF
STOP
1. If press STOP
2. Please press any key in case of turns on LCD DISPL Y power again or push the CD to DISC TR Y.
Functions
- PL Y Function
1. Insert a CD, and press
2. When MP3 CD is played,
- P USE Function
1. If you stop playing at the current position temporarily, press
2. While this pause function is active,
PLAY/PAUSE
3. If you press
the current position.
4. While the pause function is active, you can move between directories or tracks. If, however, you make
such movement, the pause function is released, and the unit starts playing automatically.
- SC N Function
1. You can use this function to search a desired song by hearing the first part of each track.
SCAN
2. If you press
track for 10 seconds.
SCAN
3. If you press
PLAY/PAUSE
P USE
a CD.
4. While the track is performing a search function,
5. If you find a desired track, press
6. In case of MP3, if you long-press
ed, and the unit plays the beginning part of each file in the directory for 10 seconds.
12
SYSTEM-2240G
NO DISC
message is displayed, keeping a standby status.
S -- CDP-- -- --
message is displayed.
READING CD ROM
message is displayed.
S -- CDP-- -- --
message is displayed.
READING CD ROM
message is displayed.
NO DISC
switch in case of NO DISC
PLAY/PAUSE
switch after CD information is displayed.
MP3
is displayed on the left top of LCD display.
S -- PAUSE
switch once more, the pause function is released and the unit starts playing from
switch in the course of playing, the unit plays the beginning part of each subsequent
switch in a stop status,
switch, the unit plays the beginning part of each track for 10 seconds from the first track of
SCAN
switch once more to stop searching and start playing.
SCAN
switch for more than 1 second,
CD STOP
message is displayed, keeping a standby
was registered in LCD DISPL Y window, LED power turns off.
PLAY/PAUSE
message is displayed.
INTRO
message is displayed, and then if you press
D -- INT NO.
message is displayed.
CD STOP
message is
switch.
PL Y/
D -- INT NO.
message is display-