Welcome A personal welcome to you from the management and employees of Inter-M All of us here at Inter-M are dedicated to providing you with the highest quality products and the best value. We sincerely trust this product will provide you with years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
Page 4
CN-9102 Dual Channel Compressor/Limiter with Gate 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades, with one wider than the other.
CN-9102 Dual Channel Compressor/Limiter with Gate Operation Make certain that speakers and input sources are properly connected before switching Keep volume levels turned down before switching on. NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This is due to the built-in protection circuitry, designed to protect...
CN-9102 Dual Channel Compressor/Limiter with Gate CN-9102 Dual Channel Compressor/Limiter with Gate Features High-Quality, versatile, easy-to-use dual channel compression unit Consistently great sounding performance for studio recording, live sound or broadcast use. Offers Ratio, Attack and Release Controls to fully customize performance for your individualized needs.
Front Panel Controls 1. Power Switch This switch is used to turn the unit on and off. When the unit is on, the integrated Power Indicator LED is lit. 2. Limiter (Threshold) Controls This knob provides continuous control of the Threshold level of the integrated compression circuitry, over a range of –40dB to +20dB.
Page 8
4. Attack Control This knob is used to control the amount of time before the compression circuitry takes effect after the threshold has been exceeded, adjustable from 0.1 milliseconds to 200 milliseconds. 5. Release Control This knob is used to control the amount of time before the gain returns to normal after the input signal drops below the threshold level, adjustable from 50 milliseconds to 3 seconds.
Page 9
20 milliseconds to 2 seconds. 14. Stereo Link Switch This switch links the two channels of the CN-9102 together to function in stereo mode. When the stereo link is active, both channels are operated by the controls of Channel A.
5. Operating Level Selector This switch determines the operating level of the CN-9102. You can choose the professional studio level of +4dB or the consumer level of –10dB. The front-panel Input/Output level meter changes to reflect the setting selected by this switch.
Specifications Audio Input Type Impedance Nominal Operating Level Maximum Input Level Side Chain Type Impedance Maximum Input/Output Level Audio Output Type Impedance Maximum Input Level Noise & Hum @ Unity Gain Crosstalk Frequency Response Gate Section Threshold Rate Compressor Section Type Threshold Ratio...
Page 14
Korea and China, and sales and marketing operations located in Japan, Europe, and the U.S.A. With more than 850 employees around the globe, Inter-M is well-poised for further growth and expansion.