Connecting The Speakers - Inter-m SYSTEM-2240G Operation Manual

Connecting the Speakers

Connecting the Speakers
Before connecting speakers, make sure the unit is switched off. Connect the speakers as shown below.
- FOR LOW IMPED NCE OPER TION
Remove the Shorting Connector from between the OPT IN and LOW IMP. OUT terminals.
Connect as per low impedance distributed system, as shown below.
- FOR HIGH IMPED NCE OPER TION
Insert the Shorting Connector between the OPT IN and LOW IMP. OUT terminals.
Connect each individual speaker as shown below.
Be certain that the total combined impedance is not less than the unit's rated impedance, as shown below:
SYSTEM-2240M
100V
41
MULTI P. COMBIN TION
MATCHING MATCHING
TRANS TRANS
70V
21
SYSTEM-2240G
25V
2.6
19