Table of Contents
Advertisement
Connector Interfaces and Other Accessories
81570A, 81578A and 81576A
Variable Optical Attenuator Modules
81571A and 81577A
Variable Optical Attenuator Modules
Agilent 81570A, 71A, 76A, 77A & 78A Variable Optical Attenuators, Eigth Edition
If you want to use straight connectors (such as FC/PC, DIN, SC or ST) to connect to the
instrument, you must do the following:
1 Attach your connector interface to the interface adapter.
See Figure 8 for a list of the available connector interfaces.
2 Connect your cable.
If you want to use angled connectors (such as FC/APC or SC/APC)
to connect to the instrument, you must do the following:
1 Attach your connector interface to the interface adapter.
See Figure 8 for a list of the available connector interfaces.
2 Connect your cable.
Accessories
29
Advertisement
Table of Contents
