Download Print this page

34946A And 34947A Dual/Triple Microwave Switch Modules - Agilent Technologies 34946A User Manual

Microwave switch/driver modules

Advertisement

34946A and 34947A Dual/Triple Microwave Switch Modules

The 34946A and 34947A modules provide single-pole, double-throw switches
in 4 GHz, 20 GHz, and 26 GHz options. The 34946A and 34947A modules are
also available with no switches installed - but include cable kits that allow you
to connect switches external to the module chassis. The configuration options
of the modules are summarized below:
The 34946A and 34947A modules do not connect to the analog buses. Instead,
all connections are made through the visible SMA connectors via external
cables. Each connector on the modules is labeled with a three-digit number
that represents a channel you can control programmatically from the front
panel or from the Web UI.
N O TE
Agilent 34946A-34947A Microwave Switch/Driver Modules User's Guide
34946A Dual 1x2 SPDT Terminated
Microwave Switch
Option 001: No switches installed
Option 004: 4 GHz switches installed
Option 020: 20 GHz switches installed
Option 026: 26 GHz switches installed
Supported Switches:
Agilent N1810UL Unterminated 3-port SPDT
Agilent N1810TL Terminated 3-port SPDT
Agilent N1811TL Terminated 4-port transfer
Agilent N1812UL Unterminated 5-port transfer
Switch reference document number:
5968-9653E
34946A Option 001 contains cables and connectors to support two of the supported switches
listed above.
34947A Option 001 contains cables and connectors to support three Agilent N1810UL switches.
There are several suppliers of RF cables and connectors used with Agilent
switches. Three suppliers are listed below:
Pasternack Enterprises, Inc.
http://www.pasternack.com
Micro-Coax 
http://www.micro-coax.com
S. M. Electronics L.L.C.
http://www.smelectronics.us
34946A and 34947A Dual/Triple Microwave Switch Modules
34947A Triple 1x2 SPDT Unterminated
Microwave Switch
Option 001: No switches installed
Option 004: 4 GHz switches installed
Option 020: 20 GHz switches installed
Option 026: 26 GHz switches installed
Supported Switches:
Agilent N1810UL Unterminated 3-port SPDT
Switch reference document number:
5968-9653E
1

Advertisement

loading

This manual is also suitable for:

34947a