Advertisement
14. Install the 44-inch hoses from the hydraulic motor to the bulkhead on the hose mount
bracket.
A. Connect the 90-degree hose end fittings to the trencher motor.
B. Connect the straight end fittings to the bulkhead
15. Connect the 83-inch and 88-inch hose from the trencher control valve to the connectors
below the hose mount bracket.
16. Secure the hoses into the hose clamp and secure the clamp with a bolt (5/16 x 2
inches).
Installation: Mounting the Trencher Pivot and Bracket
G435243
G435244
G435863
Page 2–17
3462-332 A
Advertisement
