2. Remove the hoses on the existing bulkhead behind the console. Discard the bracket
bulkhead
3. Use the 2 bolts (3/8 x 3-1/4 inches)
the selector control valve to the selector valve bracket.
4. Torque the bolts to 37 to 45 N∙m (27 to 33 ft-lb).
5. Use the hardware from the cover to mount the selector control valve and bracket to the
machine.
6. Torque the bolts to 51 to 65 N∙m (38 to 48 ft-lb).
Installation: Installing the Selector Control Valve
, and plate
. Retain the bolts
and nuts
G432660
, 4 washers
, and 2 bolts (3/8 inch)
G432661
G435141
Page 2–9
.
to mount
,
3462-332 A