Advertisement
3. Torque the bolts to 37 to 45 N∙m (27 to 33 ft-
lb).
4. Remove the 2 bolts from each side of the
battery tray and set them aside.
5. Loosely mount the trencher attachment frame
with 3 bolts
bolts
(1/2 inch). Repeat the installation of the 3 bolts
(1/2 X 1-1/ 4 inches) on the other side.
6. Secure the trencher attachment mount with the
bolts from the battery tray.
Mounting the Trencher Pivot and Bracket
5
Parts Required
2
2
2
2
2
1
1
1
3
6
3
1
2
1
3462-332A
(1/2 X 1-1/ 4 inches), 2 lower
(1/2 X 1-1/2 inches), and 2 locknuts
Tapered insert (1-1/2 inch)
Tapered pin (1-1/2 inch)
Bolt (5/8 X 1-1/2 inches)
Washer (1/2 inch)
Bolt (1/2 X 1 inch)
Bolt (M12)
Tapered insert (1-1/4 inch)
Tapered pin (1-1/4 inch)
Bolt (3/8 X 1-1/4 inches)
Washer (3/8 inch)
Locknut (3/8 inch)
Flap - Spoils
90-degree connectors
Hose mount bracket
G433118
G433117
Page 2–12
Installation: Mounting the Trencher Pivot and Bracket
Advertisement
