Advertisement
Installing Hoses With the Hydra Borer
Parts Required
1
1. Connect the short hardline to the previously installed hardline and the 45-degree
connector, on the hydra borer valve, in port T.
Ensure that the O-ring inserts into the hardline before connecting it to the longer
hardline.
2. Connect the longer hardline, from the hydra borer kit, from the straight fitting in the P
port on the hydra borer valve to the 45-degree connector on the side of the trencher
valve.
Installation: Installing the Hoses
Hardline
IMPORTANT
G434345
G436604
Page 2–7
3462-332 A
Advertisement
