Table of Contents
Advertisement
Pairing the subwoofer to the soundbar manually
1.
Connect both the soundbar and subwoofer to the AC power at the same
time.
2. The LED indicator on the subwoofer will flash blue slowly. Press and hold
the PAIR button to enter pairing mode, the LED indicator will flash blue
quickly.
3. Press the
button on the soundbar or the remote control to turn on the
soundbar. Press the INPUT button to select Bluetooth mode.
4. The LED indicator on the subwoofer will light up blue for 20-30 seconds.
The subwoofer is now paired with the soundbar.
For best sound experience, place the subwoofer on
the ground near the soundbar. The area of around the
subwoofer should be clear of any obstructions.
•
If the wireless connection fails again, check if there is
conflict or strong interference (for example, interference
from an electronic device) around your location. Remove
these conflicts or strong interferences and repeat the
above procedures.
•
The subwoofer should be within 6m of the soundbar in
an open area.
CONTROLS AND CONNECTIONS | 15
Advertisement
Table of Contents
