Monster MT-SB212DA User Manual page 13

AC IN
6
Rear Ports on the Soundbar
HDMI (ARC)
To use the ARC function, make sure the soundbar's
TO TV (ARC) socket is connected via HDMI cable
(not included) to the HDMI (ARC) socket of your
ARC compliant TV. Then just use your TV remote
control to adjust the volume output (VOL +/– and
MUTE) of the connected audio device. In the TV
settings menu, turn on the ARC and CEC function
(when CEC is turned on, the sound bar will turn on/
off automatically when the TV is turned on/off).
Connect the AC power cord to the AC IN connector on the
POWER
soundbar and the other end to a power source.
6
When you use ARC or Optical connection
to your TV or DVD, the audio output in the
TV or DVD settings menu must be set to
PCM mode (instead of Auto mode, RAW
mode or etc.).
CONTROLS AND CONNECTIONS | 13