Table of Contents
Advertisement
Dolby Atmos
Note: Your TV must support Dolby Atmos. If your TV does not support
Dolby Atmos, you must connect a Dolby Atmos supported media player
via the HDMI ports. You must use a HDMI 2.0 cable to connect.
•
Ensure that "No encoding" is selected for bitstream in the digital audio
output of the connected Dolby Atmos external device.
•
When Dolby Atmos audio format is detected, the LED display on the
soundbar will show Dolby Atmos.
•
When Dolby Digital Plus audio format is detected, the LED display on
the soundbar will show Dolby Surround.
•
In Optical/HDMI/HDMI (ARC) mode, if there's no sound output from the
soundbar and the LED display flashes, you may need to activate PCM or
Dolby Digital Signal output on your external device.
•
The soundbar may not be able to decode all digital audio formats from the
input source. This will result in the soundbar muting. Ensure that the audio
setting of the external device is set to PCM or Dolby Digital with the HDMI/
Optical port on the soundbar.
20 | OPERATION
Advertisement
Table of Contents
