Bluetooth - Monster MT-SB212DA User Manual

Bluetooth

®
You can listen to tracks from a media device if connected
to the soundbar via Bluetooth
Pairing Bluetooth
The first time you use your Bluetooth
the soundbar, you will need to pair them with one
another.
Activate Bluetooth on your compatible device, and
®
set it to search for compatible devices.
Select the speaker name: 'MT-SB212DA' from the
list of found devices.
Note: Only one playback soundbar can be
connected to the speaker. If the speaker is already
connected to another playback soundbar, the
speaker will not appear in the Bluetooth
list. To disconnect the existing paired device, press
and hold the PAIR button on the remote for 3
seconds.
If your device asks for a passkey (depending on
the device manufacturers, model, and software
version), then enter digits "0000" and press OK.
Wireless Technology.
®
Devices
®
device with
®
selection
®
The operational range between this soundbar
and a Bluetooth ® device is approximately
10 metres (without any object between the
Bluetooth enabled device and the soundbar).
®
Any obstacle between the devices can reduce
the operational range.
Before you connect a Bluetooth
to this soundbar, ensure you know the device's
capabilities. Compatibility with all Bluetooth
devices is not guaranteed.
If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
If a mobile phone on which you are playing
music receives a call, the music will be
interrupted. The phone call audio however is not
played via the speaker. Once you end the call,
the devices are connected to each other again
and playback resumes
Your device will also be disconnected when your
device is moved beyond the operational range.
If you want to reconnect your device, place it
within the operational range.
If the connection is lost, follow the instructions
(left) to pair your device to the player again.
enabled device
®
®
®
BLUETOOTH | 21