Factory Reset - Monitor Audio Anthra Series Product Manual

Factory reset

Should the need arise to carry out a factory reset on your Anthra Subwoofer simply hold down the
Factory Reset button on the back of the amplifier panel for approximately 5 seconds whilst the
subwoofer is switched On. The amplifier panel screen will display "Factory Reset in Progress" before
entering standby mode.
NOTE: all Wi-Fi details will be erased as well as any other settings and customisation.
14
Care & maintenance
Upkeep of cabinets
The finish of the cabinet can be maintained by regular dusting using a soft or micro fibre cloth.
The drive units should only be cleaned with a damp cloth, if more than normal dusting is required.
Be careful not to damage the driver units whilst cleaning.
Never use solvents or aggressive cleaning/polishing agents on your Anthra Subwoofer. When in
doubt, test the cleaning product on an inconspicuous area on the cabinet, and let it sit for several
days before committing to its use on visible portions of the cabinet.
15