Two Treatment Modes: Stamp & Flash And Slide & Flash - Philips Lumea SC1994 Manual

20
English
Two treatment modes: Stamp & Flash and Slide &
Flash
2 To adjust the light intensity setting, use the on/off button until you have
reached the required setting.
Skin sensitivity can differ per person. Therefore, the skin test is the most
important guide for selecting your light intensity setting (see 'B Test skin
24 hrs before treatment').
3 Using Lumea should never be painful. If you experience discomfort,
reduce the light intensity setting.
Note: The device is automatically disabled when your skin tone is too
dark (brownish black or darker), to prevent you from developing skin
reactions. The 'READY to flash' light will blink orange to indicate if the skin
tone is too dark.
4 After moving to another body area or after recent tanning (see 'Using
your Lumea before and after tanning'), perform a skin test to determine
the most comfortable light intensity setting. To re-activate the setting
indication feature, turn on the device.
Note: Since body areas might differ in skin color, you need to select the
most comfortable setting for each body area separately.
Your Philips Lumea has two treatment modes for more convenient use on
different body areas:
- The Stamp & Flash mode is ideal to treat small or curvy areas like knees
and underarms. Simply press and release the flash button to release a
single flash.
- The Slide & Flash mode offers convenient use on larger areas like legs.
Keep the flash button pressed while you slide the device over your
skin to release several flashes in a row.