Selecting The Light Intensity; Two Treatment Modes: Stamp & Flash And Slide & Flash - Philips Lumea SC1994 Manual

20
English

Selecting the light intensity

Two treatment modes: Stamp & Flash and Slide &
Flash
Lumea provides 5 different light intensities, you will always be able to change
to a light intensity setting you find comfortable.
1 Press the on/off button
intensity.
2 To adjust the light intensity setting, use the on/off button until you have
reached the required setting.
Skin sensitivity can differ per person, the skin test is the most important
guide for selecting your light intensity setting (see 'B Test skin 24 hours
before treatment').
3 Using Lumea should never be uncomfortably painful. If you experience
discomfort, reduce the light intensity setting.
Note: The device is automatically disabled when your skin tone is too dark
(dark brown or dark, marked with
start of the user manual), to prevent you from developing skin reactions. The
'READY to flash' light will blink orange to indicate if the skin tone is too dark.
4 After moving to another body area or sun exposure or tanning (see 'Using
your Lumea before and after sun exposure or tanning'), perform a skin test
to determine a comfortable light intensity setting. To re-activate the setting
indication feature, turn on the device.
Note: Perform a skin test before you start to treat another body area or after a
skin tone change. Determine the light intensity setting for each body area
separately.
Your Philips Lumea has two treatment modes for more convenient use on
different body areas:
-
The Stamp & Flash mode is ideal to treat small or curvy areas like knees and
underarms. Simply press and release the flash button to release a single
flash.
-
The Slide & Flash mode offers convenient use on larger areas like legs. Keep
the flash button pressed while you slide the device over your skin to release
several flashes in a row.
to turn on the device and select the desired light
in the 'Suitable skin tones' table at the